Use Your Tv; Switching On Your Tv And Putting It In Standby Mode; Adjusting Volume; Switching Channels - Philips 5505 Series User Manual

3 Use your TV

Switching on your TV and putting it in
standby mode
TV
Remote
Turns the TV on and off of standby.
● Press (POWER) on the TV or the remote, then TV will go to
suspend standby.
● Press and hold (POWER) on the TV or the remote, then TV will
go to standby mode completely.
Note(s)
●
Energy consumption contributes to air and water pollution. When the AC
power cord is plugged in, your TV consumes energy with a very low standby
power consumption.

Adjusting volume

TV
Remote
To decrease or increase volume
● Press VOL + / – on the TV or the remote.
VOL + : Volume up
VOL – : Volume down
To mute or unmute sound
● Press (MUTE) on the remote to mute the sound.
● Press (MUTE) again or VOL + / – to recover the original sound.

Switching channels

Long remote (Full)
To change channels, you can do any of the following:
Press CH + / – on the remote.
●
● Use the NUMBER buttons on the remote.
Press H I on the remote for digital channels only.
●
Short remote (Streamlined)
To change channels, you can do any of the following:
● Press on the remote.
● Press OK while viewing Live TV to open channel list.
Press H I on the remote for digital channels only.
●
17 .
English
Continued on next page.