GE AEM08LN Owner's Manual And Installation Instructions page 11

PREPARE THE AIR CONDITIONER
4
(cont.)
Slide the free end of the accordion panel
C
into the side panel rails. Slide the panel
down. Be sure to leave enough space to
slip the top and bottom of the frame into
the rails on the cabinet.
NOTE: There is a right and a left accordion
panel. Be sure to use the proper panel for
each side.
D Slide the left and right accordion panels
into the top and bottom mounting rails.
Top mounting rail
Top left
Bottom mounting rail
PREPARE THE WINDOW
5
Cut the window sash seal to the proper length .
Peel off the backing and attach the seal to the
underside of the window sash .
Installation Instructions
Top right
11
INSTALL THE AIR CONDITIONER
6
IN THEWINDOW
A Place the air conditioner on the sill with the
bottom mounting rail against its back edge .
Center it and close the window securely behind
the top mounting rail .
It should be level or slightly tilted to the outside .
Use a level; about a 1/3 bubble will be the
correct case slant to the outside .
or
Type B screws
B
Extend the left and right accordion panels to
the vertical window sashes and attach, through
the holes in the panels, with 5 Type B screws,
as appropriate .
INSTALL SUPPORT BRACKET AND
7
FOAM TOP WINDOW GASKET
CAUTION:
A
To prevent broken
glass or damage to
windows, on vinyl or
other similarly
constructed windows,
attach the window
locking bracket to the window side jamb.
Attach the window locking
bracket with one Type B
screw .
Cut the foam top window gasket to the window
B
width .
Stuff the foam
C
between the glass
and the window
to prevent air and
insects from getting
into the room .
NOTE: If the gasket supplied does not fit your
window, obtain appropriate material locally to
provide a proper installation seal .
or
Vinyl
Wood