Renault Kangoo Manual page 110

CRUISE CONTROL/SPEED LIMITER: limiter function
2
Switching on
ð
Press the side of switch 1.
The indicator light in the switch
lights up and the trip computer
enters speed limiter mode.
Limiting the speed
At a steady speed (above 18 mph (30
km/h)) and in the correct gear (for
vehicles with manual gearboxes),
press switch 2: the function is
activated.
Driving
When a limited speed has been
stored, if this speed is not reached
the vehicle behaves in a similar way
to those without the speed limiter
function.
From this point, no effort on the
accelerator pedal will allow you to
exceed the programmed speed except
in an emergency (see information on
Exceeding the limited speed).
1
The system is designed in such a
way that it is possible to detect a
difference
programmed
speed shown on the instrument
panel.
(continued)
Varying the limit speed
You may change the limit speed at
any time by pressing button 2
(briefly several times or pressing
and holding it):
- on the + side to increase the speed,
- on the – side to decrease the speed.
between the
speed and the
2
2.17