General Netware Setup; Netware 3.12 Instructions; Pconsole; Creating A Print Queue - GCC Technologies Elite XL-1208 Network Manual

NEST

General Netware Setup

This section discusses the NetWare utilities you use to set up your Elite XL
printer. This process is the same as setting up any printer, but in a few cases
there are specific instructions to configure the NEST options. These are
included in the instructions where necessary.
The instructions are described first for NetWare 3.12, and then for NetWare 4.1
(beginning on page 1-6). The utilities included in this section are PCONSOLE,
NWADMIN, and NETADMIN.

NetWare 3.12 instructions

PCONSOLE

PCONSOLE has two functions: setting up and managing print queues, and
setting up and managing print servers. This manual covers the outline of how
to set up queues and servers; you must create at least one queue and one print
server. For more details consult your NetWare documentation.

Creating a Print Queue

1.
2.
First you create a print queue.
3.
4.
5.
Then you add users to the queue.
6.
7.
8.
9.
Choose queue operators (people or groups that can manage this queue).
10. Choose Queue Operators from this menu and press Enter.
11. Modify the list of users and groups as necessary.
12. Press Esc three times to return to the PCONSOLE main menu.
13. Repeat steps 3-12 to create further queues as needed, then proceed
Log into the file server as SUPERVISOR (or equivalent).
Start the PCONSOLE program (it is located in SYS:PUBLIC).
From the menu (shown in figure 1) choose Print Queue
Information.
Press Ins to add a new item to the list of queues.
Type the name of the new queue and press Enter.
With your new queue selected, press Enter again.
Choose Queue Users from the Print Queue Information menu
and press Enter.
Modify the list of users as necessary.
Press Esc to return to the Print Queue Information menu.
to the next section.
1-3