How To Measure Ph - Calivita AQUARION Owner's Manual

H ow t o U s e
To select "Purified" waterr
With water flowing through the machine, press the "PURIFIED" button.
You will hear a voice confirmation that "Purified water"
has been selected, and the display panel will show a green symbol.
The purified water comes out of the stainless steel spout.
Nothing comes out of the acidic outlet.
POWER
PURIFIED
How to Shut off the water flow from your ionizer
With water running through the ionizer, depress the
power button. The water will stop and the display panel
will go dark indicating the ionizer is in standby or "asleep".
With water running through the ionizer, depress the "MELODY" button.
All sounds except for the chime sounds will be muted.
All sound volume including the voice, the chime sound
(with or without voice muted) can be adjusted by manipulating the Speaker Volume with a small
Phillips screwdriver on the back of your ionizer.
MELODY


How to Measure pH

Fill one of the test tubes provided about 1/4 full
with alkaline, acidic or purified water.
Drop 2 or 3 drops of the pH reagent into the container
and shake it.
If the reagent and water are not mixed well, the correct result may not be
displayed.
The pH value is determined by matching the color the pH
POWER
color chart provided.
Important Note: Water quality and mineral content vary greatly in different localities and will directly impact performance
of your ionizer with respect to pH.
• DO NOT consume water containing reagent
• Keep the pH reagent liquid, color chart, and test tubes away from direct sunlight
• KEEP pH reagent liquid AWAY FROM CHILDREN and OPEN FLAMES!
• For contact with eyes, flush liberally with fresh water, seek medical help
• If ingested, induce vomiting, seek medical help
A L K A L I N E I O N I C W A T E R S Y S T E M