Checking Status-The Status Bar - Kyocera QCP 6035 User Manual

If you aren't sure whether the phone is on, press the shuttle in. The status
bar appears at the top of the screen. Also, when the phone is on, the LED
flashes slowly.
When you are not using the phone or the organizer applications, the screen
goes blank after a few minutes to save power. To activate the screen, press
any key, press the backlight, or close and open the flip.
Checking status—the status bar
The status bar at the top of the screen provides the following information
when the phone is on.
The phone is operating in CDMA digital mode. If this icon isn't
present, the phone is either in analog mode or there is no service.
The phone is outside of its home area (roaming).
This icon shows the current signal strength. The more lines you see,
the stronger the signal. When this icon appears, you can make and
receive calls. If the signal strength is very low, you may not be able
to complete a call.
18
All manuals and user guides at all-guides.com
Kyocera QCP 6035 Smartphone User's