Locking The Controls (Hold); Storing Non-Audio Data - Sony Walkman NW-E403 Operating Instructions Manual

Locking the
controls (HOLD)
You can protect your Network Walkman
against accidental operation by using the
HOLD function when carrying it.
GROUP
Normal
HOLD
Push the Shuttle switch to the
HOLD position.
All operation buttons are disabled.
If you press buttons while the HOLD
function is activated, "HOLD" blinks in the
display.
To release the HOLD function
Set the Shuttle switch to the center (normal)
position.
30
Storing non-audio
data
You can transfer data from the hard disk of
your computer to the built-in flash memory
using Windows Explorer.
The built-in flash memory is displayed in
Windows Explorer as an external drive (for
example: as the D drive).
Notes
• If you store a lot of non-audio data into the built-
in flash memory, the space for audio data is
reduced by the same amount.
• Do not edit any file in the [OMGAUDIO] folder
of the built-in flash memory on Windows
Explorer, as audio files will not play back.