Cambridge SoundWorks FPS1500 Installation And Operating Instructions Manual page 8

All manuals and user guides at all-guides.com
FPS1500.fm Page 3 Monday, July 10, 2000 3:47 PM
3 Insert attachment arm into socket
Apply identification label
1
at back of satellite.
to back of satellite.
Attachment arm.
3
Mount the rear satellites only on
walls that are structurally sound.
1 Drill a hole about 0.5 cm (¼
inch) deep into wall.
Tap plastic anchor into hole
2
until it is flush with wall.
Screw a M5 x 25 mm screw
3
into anchor, leaving about
0.5 cm (¼ inch) protruding.
2
Thread satellite cable through
hole in desktop stand.
4 Apply Identification
label to cable.
5 Slip keyhole slot of each
rear satellite onto protruding
screw.
Position the satellites behind you
and slightly above ear level.
4 Apply rubber
pads on the
back of each
rear satellite.