Shure SCM410 Manual page 13

Frequency Response (at 1 kHz , channel controls centered)
50 Hz to 20 kHz ± 2 dB ; −3 dB Corner at 25 kHz
Total Harmonic Distortion
<0.1% at +4 dBu out , 50 Hz to 20 kHz (through 22 Hz to 20 kHz filter; Input at 12 o'clock and Master at 12 o'clock,
all other controls full counterclockwise)
Equivalent Input Noise: (150 Ωsource; A-Weighted)
-127 dBV maximum, -129 dBV typical
Output Noise (channel controls full counterclockwise A-Weighted)
Master full counterclockwise:
Master full clockwise:
Common Mode Rejection
> 70 dBV at 1 kHz
Polarity
All inputs to all outputs are non-inverting
Input Channel Activation
Attack Time
Hold Time
Decay Time
Off-Attenuation
13 dB
Overload and Shorting Protection
Shorting outputs, even for prolonged periods, causes no damage. Microphone inputs are not damaged by signals
up to +10 dBV (3V)
Equalization
Low-frequency
High-Frequency
6 dB/octave cut, adjustable corner from 25 to 320 Hz
shelving filter, ±6 dB at 5 kHz, rising to ±8 dB at 10 kHz
-101 dBV
-67 dBV
4 ms
0.4 s
0.5 s
Shure Incorporated
13/25