Page 1
All manuals and user guides at all-guides.com SHERWOOD INDUSTRIES IS AN ENVIRONMENTALLY RESPONSIBLE COMPANY. THIS MANUAL IS PRINTED ON RECYCLED PAPER. PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE This publication is intended as a guide for installers to help with the assembly of the log set only.
All manuals and user guides at all-guides.com nStaLLatIon Logs have been numbered 1 through 10 (below) to assist in the log set assembly.
Page 3
All manuals and user guides at all-guides.com Groove 1. Install Log #1 (Right Rear). Place the pin on the left side of log #1 onto the groove on top of the ember burner. Groove Log #1 in position Position the groove on the right side of Log #1 onto the tab on the right side of the grate.
Page 4
All manuals and user guides at all-guides.com Flat Surfaces The flat surface on the right side of Log #2 sits on the Log #2 in position flat surface in the center of Log #1. Groove 3. Install Log #3. Log #3 sits inside the groove on Log #3 in position the burner.
Page 5
All manuals and user guides at all-guides.com Flat Surface Grate 5. Install Log #5. The left side of Log #5 sits on the The right side of Log #5 sits on the grate. flat surface of Log #3. Notch Grate Log #5 in position 6.
Page 6
All manuals and user guides at all-guides.com Grate Notch 7. Install Log #7. The angled notch on the bottom of Log #7 fits into the left corner of the grate. Groove Log #7 in position The top of Log #7 fits into the groove on Log #2. Notch Grate 2.
Page 7
All manuals and user guides at all-guides.com Groove The pin at the top of Log #8 fits into the groove of Log #1. Log #8 in position 9. Install Log #9. Log #9 sits on Log #5 10. Install Log #10. Log #10 sits on the front center section of the grate with the bottom of the log sitting on the front burner accent.
Page 8
All manuals and user guides at all-guides.com Completed Log Set...