Number Buttons - Sony MEX-BT5100 Operating Instructions Manual

Card remote commander RM-X302
1
qg
3
4
qh
qa
qj
I AF (Alternative Frequencies)/TA
(Traffic Announcement) button 13
To set AF and TA in RDS.
J Number buttons
CD/MD* 1 :
(1): REP 12, 22
(2): SHUF 12, 22
(5): BBE MP*
2
6
To activate the BBE MP function, set
"BBE MP on." To cancel, set "BBE MP
off."
(6): PAUSE*
6
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
K DSPL (display)/PTY (Programme
Type) button 12, 14
To change display items; select PTY in RDS.
L Disc slot 7
To insert the disc.
M RESET button 6
N Z (eject) button 7
To eject the disc.
The following buttons on the card remote
commander have also different buttons/functions
from the unit.
qg ENTER button
7 To apply a setting.
qh LIST button
qk
To list up.
qj Number buttons
ql
Buttons 1 to 6 share the same functions as
the number buttons on the unit.
w;
qk M (+)/m (–) buttons
The same as pushing the joystick up/down.
wa
ql < (.)/, (>) buttons
ws
The same as pushing the joystick left/right.
w; SCRL (scroll) button
To scroll display item.
wd
wa SOUND button
To select sound items.
ws ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
wd VOL (volume) +/– buttons
To adjust volume.
*1 When an MD changer is connected.
*2 If the changer is connected, the operation is
different, see page 21.
*3 When an ATRAC CD is played.
*4 When an MP3/WMA is played.
*5 When a CD/MD changer is connected.
*6 When playing back on this unit.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless (SOURCE) on the unit is pressed, or a disc is
inserted to activate the unit first.
Tip
For details on how to replace the battery, see
"Replacing the lithium battery of the card remote
commander" on page 25.
9