Component Replacement Procedure - Sharp PJ-TA161 Service Manual

1. Unlock the fixing lock and pull the front grille.
2. Turn the spinner fan clockwise and remove the blade.
3. Turn the grille lock nut counterclockwise and remove the rear grille.
1. Remove the grille ass'y in accordance with "REMOVE OF GRILLE ASS'Y".
2. Turn up the unit.
3. Remove 5 screws holding the hard board to the body.
4. Now the hard board is free.
1. Remove hard board in accordance with "REMOVE OF HARD BOARD".
2. Remove 2 screws holding the piano switch ass'y.
3. Remove the closed terminal and cut the power cord lead wire
from the piano switch ass'y. (See Fig. 3)
4. Now the power cord is free.

COMPONENT REPLACEMENT PROCEDURE

REMOVE OF GRILLE ASS'Y
Blade
Spinner fan
Front grille
Fig. 1
REMOVE OF HARD BOARD
REMOVE OF POWER CORD
Rear grille
Grille lock nut
Detach the fixing lock
to unlock.
Knob switch
Piano switch ass'y
Screw
Fig. 2
5
Motor ass'y
Fixing lock
Body
Insulation sheet
Power cord
Hard board
Screw