Playing Cds Without Interruption - Sony MHC-RX90 Operating Instructions Manual

Programming the CD tracks
(continued)
To Press
Check the CHECK on the remote
programme repeatedly. After the last
track, "CHECK END"
appears.
Clear a track from CLEAR on the remote in
the end stop mode.
Clear a specific CHECK on the remote
track repeatedly until the
number of the track to be
erased lights up, then press
CLEAR.
Add a track to the 1 Select the disc tray with a
programme
2 Select the track by
3 Press ENTER/NEXT.
Clear the entire
programme twice while playing.
Tips
• The programme you made remains in the CD
player even after it has been played back. Press
· to play the same programme again.
• If "--.--" appears instead of the total playing time
during programming, this means:
– you have programmed a track number
which exceeds 20
– the total playing time has exceeded 100 minutes.
22
DISC 1~3 button.
turning the jog dial.
once in stop mode or
Playing CDs without
interruption
–– Non-Stop Play/Applause Mix
You can play CDs without pausing between
tracks or you can mix the sound of applause
between tracks.
2
POWER
0 )
1
Press FUNCTION repeatedly until
"CD" appears in the display, then
place a CD.
2
Press NON-STOP repeatedly to
select the mode you desire.
To Select
Play without NON-STOP PLAY
pausing between
tracks
Mix applause APPLAUSE MIX
between tracks
3
P r e s s · .
To cancel Non-Stop Play
Press NON-STOP so that "NON-STOP OFF"
appears in the display.
3 1
„
Æ‚
⁄