Advertisement
Epson CaptureOne
Cleaning the Scanner Glass
Clean the scanner glass if it gets dirty from ink or paper dust,
or at least once every 6 months or 100,000 passes.
1. Open the scanner cover as shown below.
2. Lightly wipe the glass areas shown in the picture below with
a soft dry cloth.
CAUTION: To prevent spots or stains, do not use synthetic
detergent, benzine, water, or other liquids to clean.
Never apply any liquid directly to the scanner glass.
3. If the scanner glass is smeared with grease, oil, ink, etc.,
wipe the glass with a cloth lightly dipped in alcohol.
4. Close the scanner cover firmly until it clicks into place.
Cleaning the MICR Unit
Dirt or dust on the MICR unit can increase errors in reading
magnetic characters. Clean the MICR unit every 6 months or
100,000 passes. Use the TM-S1000 Utility in the Utility &
Documents CD or your application to clean the MICR unit.
Use PRESAT Brand (KIC) "CHECK READER CLEANING
CARD" or an equivalent commercial cleaning sheet.
Note: For cleaning steps, see the TM-S1000 Utility User's Manual.
Do not use sticky cleaning sheets. They may cause a jam or
machine failure.
Dispose of used cleaning sheets properly. Do not reuse.
4 - Epson CaptureOne
Clearing a Paper Jam
Open the scanner cover or franker cover to remove the
jammed paper. See the illustration below.
Transporting the Scanner
Follow the steps below to transport the scanner.
1. Turn off the scanner.
2. Confirm that the
3. Remove the power supply connector.
4. Store the pocket guide and the ASF guide inside the
scanner.
5. Pack the scanner upright.
Self-test
The self-test checks the following printer functions:
❏ Model name
❏ Serial number
❏ Control firmware version
❏ DIP switch settings
❏ Presence of franking cartridge
The self-test is performed with Epson TM-S1000 Utility. See
TM-S1000 Utility User's Manual for details.
Scanner Dimensions and Weight
6.93 x 13.98 x 6.30" (H x W x D) {176 x 355 x 160 mm}
8.82 lb {4 kg}
11/07
POWER LED is off.
Advertisement
