Optional Accessories - Gaggia Multix style PROFESSIONAL Instructions For Use Manual

All manuals and user guides at all-guides.com
e n g l i s h

OPTIONAL ACCESSORIES

IRON (Fig. 25-26)
USING THE STEAM
GENERATOR FOR IRONING
To use the steam generator for ironing, introduce
the iron connector into the accessories socket
3
(Fig. 25A) in place of the work hose as descri-
bed on page 28 (Fig. 8) under section
2
"Connecting the hose".
- Point the iron temperature selector (23) to the
Fig. 25A
desired temperature area to adjust the iron sole
plate temperature to the type of fabric you are
going to iron.
- Wait about 3 min. to allow the iron plate to
reach the temperature selected.
- Proceed as per normal (as you would do with
dry ironing) and release steam when necessary
by pressing the button (22) located on the handle.
23
NOTE
This ironing method is particularly suita-
ble for removing shine spots from clothes,
and making woollen garments, curtains,
Fig. 25
etc. come alive again. Textiles can also be
ironed with the iron in its vertical position.
IMPORTANT
Be extremely careful when ironing diffe-
22
rent types of fabrics in the same ironing
session. It is advisable to gradually
increase the temperature following the
SYNTHETICS/ SILK / WOOL/ COTTON/
LINEN sequence. This will eliminate any
idle time. However, should you need to
pass to a lower temperature (silk, synthe-
tics, etc.) wait at least 8-10 min to allow
the iron plate to cool down, otherwise
you run the risk of damaging the fabric
Fig. 26
and soiling the sole plate.
33