EverFocus LED Indicates Box Quick Start Manual

1. Introduction
The LED Indicates Box is designed to monitor mobile DVR status, such as
storage, GPS, 3G/4G/WiFi connectivity; or trigger emergent alarm among
the MDVR, Control Center (Xfleet) and External I/O Box.
2. Packing List
• LED Indicates Box x 1
• Screw Pack x 1 (with 4 screws & anchors)
3. Specification
Model No.
Buzzer
MDVR Connectivity Port
RS-232
Voltage Input
Dimensions (L x W x H)
Weight
Working Temperature
Relative Humidity
Certificates
4. Mounting
Screw
Anchor
*All images presented in this document are for example only. Please visit EverFocus regional
Websites for detailed ordering information.
*Information contained in this document is subject to change without notice.
LED Indicates Box
1 (sounds for ERR, ALM or Emergent events)
1
4 Pins (Support 57600bps)
+ 5V
80 x 72 x 27.6mm / 3.15" x 2.83" x 1.09"
145g / 0.32lb
-40°C~55°C / -40°F~131°F
< 90%
CE, FCC
Mount the LED Indicates Box onto a
surface using the supplied screws.
Use the anchors if necessary.
LED Indicates Box
• RS-232 Cable x 1
• Quick Installation Guide x 1