Table of Contents
Advertisement
4. Connections
4.2
Connecting to the Host Computer
Use the USB cable provided to connect the S5U1C17001H to the host computer. When the S5U1C17001H is
connected to the host computer for the first time, the host computer will request that the USB driver be installed.
4.2.1
USB Driver Locations
The USB driver is located as shown below. Use the appropriate USB driver to suit the operating system.
When S1C17 processor is selected
The USB driver is located in the following directory created when the S5U1C17001C (GNU17) was
installed.
User Folder\EPSON\GNU17\utility\drv_usb
When S1C33 processor is selected
The USB driver is located in the following directory created when the S5U1C33001C (GNU33) was
installed.
User Folder\EPSON\GNU33\utility\drv_usb\Icd33v60
4.2.2
USB Driver Installation Procedure
Install the USB driver as follows.
(1) First time the S5U1C17001H is connected to the host computer with the USB cable, the dialog box
shown below will be displayed.
When S1C17 processor is selected
18
Figure 4.2.2.1 New Hardware Detection Start Screen
Seiko Epson Corporation
When S1C33 processor is selected
S5U1C17001H2 User Manual
(ICDmini Ver2.0)
Advertisement
Table of Contents
