Table of Contents
Advertisement
What should I do if power indicator lights but my display stays blank?
Make sure the proper input for your display (TV, DVI-D monitor) is selected.
Make sure your display (TV, DVI-D monitor) is turned on.
If your display is still blank, follow these steps:
1
Press the power button for more than four seconds to check that the power indicator goes out. Then turn on your
computer again.
2
If your display still stays blank, unplug the power cord and leave the computer for about a minute. Then plug in the
power cord and turn on the computer again.
What should I do if my computer or software stops responding?
If your computer stops responding while a software application is running, press the Alt+F4 keys to close the application
window.
If the Alt+F4 keys do not work, click Start, the arrow next to the Lock button, and Shut Down to turn off your computer.
If your computer does not turn off, press the Ctrl+Alt+Delete keys and click the arrow
and Shut Down.
If the Windows Security window appears, click Shut Down.
!
Turning off your computer with the Ctrl+Alt+Delete keys or the power button may cause loss of unsaved data.
If your computer still does not turn off, press and hold the power button until the computer turns off.
Remove the power cord.
Try reinstalling the software.
Contact the software publisher or designated provider for technical support.
n
Troubleshooting
next to the Shut down button
112
N
Advertisement
Table of Contents
