Canon PIXMA IP4000R Setup Manual page 39

11
Enter the administrator's name and
password, and click OK.
If you have forgotten the administrator name and/or
password, click
Help.
12
A message asking for your confirmation
to restart your Mac appears on the
screen. Read the message, then click
Continue Installation.
Software installation will start.
13
Click Restart.
When the computer restarts, BJ Network Tool will start
up. If it does not start automatically, select Library -
Printers - Canon - BJ Printer - Utilities - BJ Network
Tool.
14
Select Setup from the pop-up menu
and iP4000R in Printer, then click OK.
If the The printer could not be detected message is
displayed, check that your printer is connected with a
USB cable and turned on, then click Update.
15
Select Wired LAN and click OK.
If the printer's network settings have been set
before, the Printer Network Setup dialog box is
displayed. For details, see "The Printer Network
Setup dialog box is displayed during setup" in
"Troubleshooting" on page 79.
and follow the instructions in Mac
37