Disposal Of The Device - Topcom BD-4620 User Manual

7. Do not store the device in extremely low (less than –13
(more than 158
R.H..
8. Clean the blood pressure monitor body and the cuff carefully with a slightly
damp, soft cloth. Do not press. Do not bend the pre-formed cuff inside out. Do
not wash the cuff or use chemical cleaner on it. Never use thinner, alcohol or
petrol (gasoline) as cleaner.
9. If you have one of the circulatory problems as arteriosclerosis, diabetes, liver
disease, kidney disease, severe hypertension, peripheral circulation..., please
consult your healthcare professional before using the device.
10. This product is not suitable for people with arrhythmias and pregnant women.
To avoid inaccurate results caused by electromagnetic
interference between electrical and electronic equipments,
do not use the device near a cell phone or microwave oven.
At least keep a maximum output power of 2 W yields and a
distance 3.3m away from this equipment.
4 Tips
Here are a few helpful tips to help you obtain more accurate readings:
• Do not measure your blood pressure immediately after consuming a large meal. To
obtain more accurate readings, please wait one hour before measuring.
• Do not smoke or drink alcohol before measuring your blood pressure.
• You should not be physically tired or exhausted while taking a measurement.
• Rest at least 5~10 minutes before taking a measurement.
• Do not take measurements if you are under stress or under tension.
• Take your blood pressure at normal body temperature. If you are feeling cold or
hot, wait a while before taking a measurement.
• If the monitor is stored at very low temperature (near freezing), have it placed at a
warm location for at least one hour before using it.
• Relax at least 3~5 minutes in between measurements.
• Wait 30 ~ 45 minutes before measurement if you've just consumed beverages
containing caffeine or smoked cigarettes.
5

Disposal of the device

At the end of the product lifecycle, you should not throw this product into the
normal household garbage but bring the product to a collection point for the
recycling of electrical and electronic equipments. The symbol on the product,
user guide and/or box indicate this.
Some of the product materials can be re-used if you bring them to a recycling
point. By re-using some parts or raw materials from used products you make an
/70 ) temperature, nor in a place its humidity exceeds 93%
°F °C
TOPCOM BD-4620
/–25 ) and high
°F °C
7