Sony VGC-RA204 Hardware Manual page 27

Hardware Guide
Before using the mouse
Before attempting to use the wireless mouse, you must enable communication between the computer and the mouse.
Two AA batteries, specific for use in the
wireless mouse, are supplied with your VAIO.
To connect the wireless mouse, proceed as
follows:
1
Turn the wireless mouse over and slide
the power button to the OFF position (1).
2
Insert the two specific AA batteries into
the wireless mouse as shown (2).
3 Make sure the wireless receiver is
connected to a USB connector (3) on the
main unit.
4
Turn on the computer.
5 Turn the wireless mouse over and slide
the power button to the ON position (4).
6 Press the CONNECT button on the
wireless receiver (5).
7
Press the CONNECT button on the
underside of the mouse (6).
Press this button within 50 cm of the receiver.
Communication between the wireless mouse and the computer is now active.
n N
26
Using your VAIO computer