Table of Contents
Advertisement
n
137
N
Upgrading Your VAIO Computer
11 Connect the Serial ATA power cable and the Serial ATA cable.
12 Tighten the screws to secure the drive holder.
13 Replace the drive bay cover and tighten the screws.
14 Connect the power cord and the peripheral devices that you disconnected in step 3.
15 Replace the back panel cover.
See Removing and Replacing the Covers
(page 21)
for the procedure.
16 Plug the computer and the rest of the peripheral devices to the power source.
17 Turn on all peripheral devices and then the computer.
Advertisement
Table of Contents
