3
Connect other cables to the computer, if necessary.
❑ To set up TV connections available on models with the TV tuner board, see Using the TV Function
❑ To connect an HDMI cable to the HDMI INPUT port for using the HDMI Input function, see Using the HDMI Input
Function
(page
69).
❑ To connect your computer to an Ethernet network, see Connecting to a Network (LAN)
4
Snap open the cable clamp (11), route the cables through it, and then snap the cable clamp back shut.
5
Replace the stand cover and the back panel cover.
See Removing and Replacing the Covers
✍
To disconnect your computer completely from AC power, unplug the power cord or the AC adapter when the computer is off.
Make sure that the AC outlets are easily accessible.
!
If you unplug the power cord or the AC adapter from your computer while the computer is on or in Sleep mode, you may lose all unsaved data.
(page 21)
for the procedure.
n
29
Getting Started
(page
60).
(page
109).
N