Setting the boiler water temperature
In the delivered condition, the boiler water temperature
is set to 85 °C. The temperature of the boiler water is
controlled to the set value.
Press the following keys:
1.
For the "Extended menu".
å
2.
/
For "Boiler".
|
~
Adjusting the set value for residual oxygen
Only change this setting after consulting a heating con-
tractor. You can also have the set value adjusted by
your heating contractor.
In the delivered condition, the minimum set value is
8 %.
Press the following keys:
1.
For the "Extended menu".
å
2.
/
For "Boiler".
|
~
Setting the minimum system temperature
Select a value according to the minimum required tem-
perature for the heating system. If the temperature falls
below this value, the additional heat generator starts.
Press the following keys:
1.
For the "Extended menu".
å
2.
/
For "Boiler".
|
~
Restoring factory settings
You can individually restore all modified values for
each heating circuit to their factory setting.
Press the following keys:
1.
For the "Extended menu".
å
2.
/
For "Settings".
|
~
3.
To confirm.
d
4.
/
For "Standard setting".
|
~
3.
To confirm.
d
4.
/
For "Boiler water temp".
|
~
5.
To confirm.
d
6.
/
For the required temperature.
|
~
7.
To confirm.
d
3.
To confirm.
d
4.
/
For "Flue gas residual O2".
|
~
5.
To confirm.
d
6.
/
For the required value.
|
~
7.
To confirm.
d
3.
To confirm.
d
4.
/
For "Min set system temp".
|
~
5.
To confirm.
d
6.
/
For the required temperature.
|
~
7.
To confirm.
d
5.
To confirm.
d
6.
/
For selecting the required parameter group.
|
~
The parameter groups available are "Gen-
eral", "Heating" or "DHW".
Select the required heating circuit under
"Heating" with
7.
To confirm.
d
8.
/
For "Yes".
|
~
9.
To confirm.
d
Further adjustments
/
and continue.
Ù
Ú
33