AV28L2EUGR
AV28L2EUBL
AV28L2EUGY
(3) Method of Setting
" Method of Setting 1.IF
[VCO] ・・・・・・・・・・・・・・・・・・・・・・・・・・・・ * It must not adjust without signal.
① 1 Key ・・・・・・・・・・・・・・・・・・・・・・・・・ Select 1.IF.
② 1 Key ・・・・・・・・・・・・・・・・・・・・・・・・ Select 1. VCO (CW)
③ INFORMATION (
" Method of setting 2.V/C, 3.AUDIO, 4.DEF and 5.VSM PRESET.
① 2 ~ 5 Key ・・・・・・・・・・・・・・・・・・・・・・ Select one from 2. V/C, 3. AUDIO, 4. DEF and 5. VSM PRESET .
② FUNCTION UP/DOWN Key ・・・・・ Select setting items.
③ FUNCTION -/+ ・・・・・・・・・・・・・・・・・ Set (adjust) the setting values of the setting items.
④ MENU (OK) Key ・・・・・・・・・・・・・・・ Memorize the setting value.
⑤ INFORMATION (
" Can not setting 6. STATUS, 7. PIP, 8. --- , 9. SHIPPING(ON) & 0. BUS FREE.
(4) Release of SERVICE MENU
1) After completing the setting, return to the SERVICE MENU, then again press the INFORMATION (OK) key.
16
Check the arrow position between ABOVE REF. and BELOW REF.
) Key ・・・・・・ Return to the SERVICE MENU screen.
i
(Before storing the setting values in memory, do not press the CH, TV, POWER ON / OFF key -
if you do, the values will not be stored in memory.)
) Key ・・・・・・ Return to the SERVICE MENU screen.
i
No. 51778