Sony PCV-RX201 User Manual page 64

Getting help
I cannot play a CD
❑
After inserting the CD, wait for a few seconds for the system to detect it before you try to access it.
❑
Make sure the label of the disc is facing outwards.
❑
If the disc requires software, make sure the software is installed according to the instructions of the
program.
❑
Check the volume of your speakers.
❑
Clean the disc with an appropriate cleaner.
❑
Moisture condensation may have occurred. Leave the computer for at least 1 hour before turning it on.
I cannot play a DVD-ROM
❑
If a region code warning appears when you are using the DVD player, it could be that the DVD-ROM you
are trying to play is incompatible with the DVD drive on your VAIO desktop. The region code is listed on
the packaging of the disc.
❑
Check your PG settings (Parental Guidance) in the DVD software as this might be preventing you from
playing certain DVDs when it is activated.
❑
If you hear sound but cannot see a picture, your computer's video resolution may be set too high. For
best results, change the resolution in the Windows
Display - Settings to 800 x 600 using 8-bit colour.
❑
If you see the video but cannot hear sound, check all of the following:
❑
Make sure the mute setting is off in your DVD player software.
❑
Check the master volume setting in the Audio Mixer. If you have connected external speakers, check
the volume settings for your computer speakers and check the connections between your speakers
and the computer.
❑
In the Device Manager, check that the correct drivers are installed properly. To display the Device
Manager, Go to the Control Panel. Click Performance and Maintenance, and then the System
icon. In the System Properties dialog box, click on the Hardware tab.
®
Control Panel – Appearance and Themes -
n N
63