Sony PCV-RS702 Hardware Manual page 51

Hardware Guide
10 Press evenly against the memory module's upper corners. The end latches snap into position automatically.
11 Reinstall any add-on cards or components you removed.
12 Replace the cover sliding the cover firmly over the unit, sliding it forward
until the cover snaps into place.
13 Replace the three release screws.
✍
The illustrations here may vary from the actual configuration of your VAIO.
!
Use only the memory modules specified on the printed Specifications sheet.
!
To avoid damaging a memory module or the memory module slot, move the side latches slightly
outward to relieve pressure. The module is properly inserted when the side latches click into place.
n N
50
Upgrading your VAIO computer