Honda XR250 Tornado 2016 Owner's Manual page 162

XR250 TORNADO
NOTICE
Improper installation of the oil filter can cause serious
engine damage.
6. Reinstall the oil filter cover, making sure the bolts
are tightened securely.
Oil filter cover bolts torque:
12 N.m (1.2 kgf.m; 9 lbf.ft)
7. Check that the sealing washer on the drain plug
is in good condition and install the plug. Replace
the sealing washer every other time the oil is
changed, or each time if necessary.
Oil drain plug torque:
30 N.m (3.0 kgf.m; 22 lbf.ft)
8. Fill the crankcase with the recommended grade
oil; approximately:
1.5 liter (1.6 US qt; 1.3 Imp qt)
9. Install the oil filler cap/dipstick.
10. Start the engine and let it idle for 3 – 5 minutes.
11. 2 – 3 minutes after stopping the engine, check
that the oil level is at the upper level mark on
the dipstick with the motorcycle upright on firm,
level ground. Make sure there are no oil leaks.
65