Table of Contents
Advertisement
Operation
Before using the heater ensure that all warnings and instructions have been read carefully.
IMPORTANT - Objects or clothing must not be placed on the appliance.
IMPORTANT - Do not operate unless the castors have been securely fitted.
IMPORTANT - The element has been coated with a protective film which will burn off during the first few minutes
of use and may cause a small amount of fuming. This is quite normal, the fumes are non-toxic and will quickly disappear. We
recommend that you open a window to ventilate the room when using the heater for the first time.
To energise the heater simply plug it in. You will hear an audible beep and the Standby button will illuminate red. This
indicates the appliance is energised and ready for use.
Positioning the Heater
WARNING - Always ensure the information outlined in IMPORTANT SAFETY INFORMATION section
is strictly adhered to.
Always ensure that the heater is stood on a firm, level base near to, but not directly underneath a
suitable mains supply socket.
Select the position for the heater ensuring there is clearance from any furniture and fittings of at least 300mm above the
heater and 150mm each side and 300mm from the control and end panel. We recommend maximising the clearance where
possible.
Screen & Controls Buttons
Screen
Delayed Start Icon
Runback Timer icon
Buttons
.
Decrease Temperature
(Min 5ºC/43ºF)
Runback Timer
Time
Sound off
Standby
Temperatue
Heat output
Keylock
Frost Protect
Increase Temperature
(Max 30ºC/86ºF)
Heating Mode
or
Standby
Advertisement
Table of Contents
