Transportation, Storage And Disposal; Technical Data - Husqvarna DM 540i Operator's Manual

Transportation and storage
• The supplied Li-ion batteries obey the Dangerous
Goods Legislation requirements.
• Obey the special requirement on package and labels
for commercial transportation, including by third
parties and forwarding agents.
• Speak to a person with special training in dangerous
material before you send the product. Obey all
applicable national regulations.
• Use tape on open contacts when you put the battery
in a package. Put the battery in the package tightly
to prevent movement.
• Remove the battery for storage or transportation.
• Put the battery and the battery charger in a space
that is dry and frost-free.
• Do not keep the battery in an area where static
electricity can occur. Do not keep the battery in a
metal box.
• Put the battery in storage where the temperature is
between 5°C/41°F and 25°C/77°F and away from
open sunlight.
• Put the battery charger in storage where the
temperature is between 5 °C/41 °F and 45°C/113°F
and away from open sunlight.
• Charge the battery 30% to 50% before you put it in
storage for long periods.

Technical data

Motor
Type
Features E-gear mode
Drill bit
Max. drill diameter in concrete, mm/in.
Min. drill diameter in concrete, mm/in.
Weight, kg/lb (without battery)
Water cooling
Water coupling
Maximum water pressure, bar
Tool connection
Spindle thread
Operating data
1567 - 001 - 21.06.2021

Transportation, storage and disposal

Technical data
• Put the battery charger in storage in a space that is
closed and dry.
• Keep the battery away from the battery charger
during storage. Do not let children and other not
approved persons to touch the equipment. Keep the
equipment in a space that you can lock.
• Clean the product and do a full servicing before you
put the product in storage for a long time.
• Use the transportation box of the product and
remove the battery during transportation and
storage.
• Attach the product safely during transportation.
Disposal of the battery, battery charger
and product
The symbol below means that the product is not
domestic waste. Recycle it at a recycling station for
electrical and electronic equipment. This helps to
prevent damage to the environment and to persons.
Speak to local authorities, domestic waste service or
your dealer for more information.
(Fig. 10)
Note:
The symbol shows on the product or package of
the product.
BLDC (brushless) 36V
2 gears
100/4
25/1
4.9/10.8
Gardena
A-Rod/CRI 1 1/4"-7 UNC external, G 1/2" internal
Mech gear 1
®
3
Mech gear 2
21