Table of Contents
Advertisement
1
Operating the
appliance
P reparing the appliance
O p e r a t i n g t h e a p p l i a n c e
The appliance was tested before
delivery. To remove residual water from
the test procedure, the first wash cycle
should be run without laundry using the
Drum Clean Û programme.
~ "Before washing for the first time"
on page 19
Notes
Never switch on a damaged
■
appliance!
Inform customer service!
■
Insert mains plug.
1.
:
Warning
Risk of death from electric shock!
Risk of death if live parts are
touched.
– Never pull out the mains plug by
tugging the power cord.
– Insert/pull out the mains plug
with dry hands only.
Turn the water tap on.
2.
Open the appliance door.
3.
Operating the appliance
Select programme/switch on
the appliance
If you have activated the
Note:
childproof lock, you must first deactivate
it before you can set a programme.
Use the programme selector to select
the required programme. The
programme selector can be rotated in
either direction.
The appliance is switched on.
The programme default settings for the
selected programme alternately appear
in the display panel:
The maximum load and
■
the duration of the programme and
■
...
■
Adjusting the selected
programme
Changing default settings
You can use the displayed default
settings or adjust the selected
programme by touching the relative
buttons to fit the laundry care needs.
e.g. Temp.°C 6,rpm 0, Finished in ñ.
The buttons are sensitive, they
Note:
only need to be touched gently. If the
button Temp.°C 6,rpm 0, Finished in ñ
is held down, the setting options are
automatically scrolled through.
en
35
Advertisement
Table of Contents
