Paper You Cannot Use - Canon Laser Shot LBP-1310 User Manual

■
Envelopes
Data cannot be printed inside a 10 mm wide border around the envelope.
Adjust the print location depending on the application being used.
10 mm
105 mm

Paper You Cannot Use

To avoid problems such as paper jams and printer malfunctions, the following types
of paper should never be used.
IMPORTANT
•
Paper that tends to cause paper jams.
- Paper that is too thick or too thin.
- Paper that is irregular shaped.
- Paper that is wet or holding moisture.
- Paper that is torn or damaged.
- Paper that is rough or extremely smooth.
- Paper that has holes for binding or perforations.
- Curled paper or paper with creases.
- Paper with a special coating on its surface (Coated paper for ink jet printers, etc.).
- Label sheets with the base easily peeled.
- Paper that has been used once by the copy machine or other laser printers. (The back
of that paper is also improper. However, note that you can use the paper delivery tray to
perform manual duplex printing on the reverse side of a sheet of paper that has already
been printed on using this printer. You cannot print on the same side of a sheet of paper
that has already been printed on.)
- Paper that has fins.
- Paper that is wrinkled.
- Paper that is folded at corners.
•
Paper that changes its quality at high temperature.
- Paper that uses ink that melts, burns, evaporates or emits dangerous fumes at
temperatures of 150 °C or higher.
- Heat-sensitive paper.
- Paper used for color printing with a processed surface.
- Paper with a special coating on its surface. (Coated paper for ink jet printers, etc.)
- Paper with adhesive on its surface.
•
Paper that causes failure or damage to the printer
- Carbon paper.
12
235 mm
123-4567
東京都千代田区
○○○
10 mm
10 mm
10 mm