ABB A238-H Series Original Assembly Instructions page 10

Assembly Instructions / A200-H
2 Safety / 2.3 Occupational safety
Cover all connections on the turbocharger so that no foreign objects can enter the tur-
u
bocharger.
Wear personal protective equipment (PPE) for welding operations.
u
Mechanical hazards when working on the turbocharger
WARNING
Mechanical hazard
Severe injuries to personnel or fatal accidents can be caused by mechanical
influences as a consequence of hazardous and inadequate operational pro-
cedures.
Observe the general rules for occupational safety and prevention of acci-
u
dents.
Ensure workplace safety.
u
Only perform operations that are described in this chapter.
u
Only perform operations for which you have previously received instruc-
u
tion or training.
Hazards due to operating materials and supplies
Operating materials and supplies can include: Oils, greases, coolants, cleaning agents and
solvents, acids or similar substances.
WARNING
Handling operating materials and supplies
Swallowing or inhaling vapours of operating materials and supplies or con-
tact with them may be harmful to health. Flammable and combustible oper-
ating materials and supplies can catch fire or resulting vapours can lead to
an explosion.
Do not breathe in these substances and avoid contact with the skin.
u
Ensure proper ventilation.
u
Observe the information in the material safety data sheet for the operat-
u
ing materials and supplies.
Comply with local legislation.
u
Wear safety goggles.
Wear safety gloves to protect against mechanical hazards.
Wear a respiratory mask to protect against gases.
© Copyright 2021 ABB. All rights reserved. HZTL455311P0042_EN Rev.A September 2021