Using Your Cleaner - Bissell EASYVAC 23T7 SERIES User Manual

O
perations

Using your cleaner

1. Remove the plastic plug guard and
dispose.
2. Unclip polarized plug from power cord.
3. Rotate the Quick Release cord wrap
towards floor and slip power cord from
upper and lower cord wraps.
4. Connect power cord plug to a polarized
outlet.
5. To keep the power cord out of your way
while cleaning, place it in the cord hook
by the top of the vacuum.
Power Switch pedal
The red power switch pedal is located
on the back of the cleaner, under the
cord wraps.
1. Step on the power switch to turn the unit
"On". The rotating floor brush and suc-
tion will start.
2. Step on the pedal again to turn the vacuum
"Off".
w w w . b i s s e l l . c o m
Power
Switch
Pedal
Tip:
Before cleaning under low furniture,
check for objects that might block the
vacuum hose. Do not pick up hard
or sharp objects such as glass, nails,
screws, coins, paper clips, etc. with
vacuum.
CaUTION:
Before using your vacuum, make
sure that all filters (pre-motor and
post-motor) are in place. Do not
operate your vacuum without the
filters.
8 0 0 . 2 3 7 . 7 6 9 1
Cord
Hook
Quick
Release
Cord
Wrap
7