Install Cowling - Yamaha F115A Owner's Manual

Operation
F115A, FL115A, F115A1, FL115A1
1
1. Fitting
2. Flushing device
F150A, FL150A, F150A2, FL150A2, F150B
1
1. Fitting
2. Flushing device
EMU42781

Install cowling

F115A, FL115A, F115A1, FL115A1
1. Be sure that all cowling lock levers are
released.
2. Be sure that the rubber seal is seated all
the way around the top cowling.
3. Place the top cowling on bottom cowl-
ing.
4. Check to be sure the rubber seal fits cor-
rectly all the way around the engine.
5. Move the levers to lock the cowling as
shown. NOTICE: If the top cowling is
not installed correctly, water spray
under the top cowling can damage the
engine, or the top cowling can blow
off at high speeds.
61
2
ZMU06053
2
ZMU06159
[ECM01992]
After installing, check the fitting of the top
cowling by pushing it with both hands. If the
top cowling is loose, have it repaired by your
Yamaha dealer.
F150A, FL150A, F150A2, FL150A2, F150B
1. Be sure that all cowling lock levers are
released.
2. Be sure that the rubber seal is seated all
the way around the engine.
3. Place the cowling on top of the seal.
ZMU07404
ZMU06132