VTech baby Kick & Score Playgym Instruction Manual page 8

2. Insert the Electronic Activity Panel between the Support Legs. Use
the two Plastic Screws to attach the Electronic Activity Panel to
the Support Legs. The Electronic Activity Panel can be adjusted to
different angles to suit your baby's needs.
3. Insert the Giraffe Body into the back of the Giraffe Mobile, then
insert the Giraffe Body into the slot on the top of the Support Foot.
Once the assembled giraffe is attached to the base, it cannot be
removed. Use the remaining two Small Screws to secure.
4. Insert the four gray Attachment Straps on the Play Mat through the
four slots in the Support Feet and the two slots on the back of the
Electronic Activity Panel. Feed the staps through the slots until the
tabs are through to secure the Play Mat.
8