Table of Contents
Advertisement
CX-JV77
General
Power requirements
Saudi Arabian model:
120 – 127/220 or
230 – 240 V AC, 50/60 Hz
Adjustable with voltage
selector
Other models:
120 V, 220 V or
230 – 240 V AC, 50/60 Hz
Adjustable with voltage
selector
Power consumption
155 watts
Dimensions (w/h/d) incl. projecting parts and controls
Amplifier/Tuner/Tape/CD section:
Approx. 280 × 325 ×
425 mm
Approx. 11.0 kg
Mass
Design and specifications are subject to change
without notice
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE
WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE
PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR
IN SUPPLEMENTS PUBLISHED BY SONY.
2
All manuals and user guides at all-guides.com
Notes on chip component replacement
• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270 ˚C
• Do not touch the soldering iron on the same conductor of the
• Be careful not to apply force on the conductor when soldering
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation
exposure.
damaged by heat.
during repairing.
circuit board (within 3 times).
or unsoldering.
This appliance is
classified as a CLASS 1
LASER product. This
marking is located on the
rear exterior.
Advertisement
Table of Contents
