Bissell PROHEAT2X 20B4 User Manual page 7

O
perations
Custom Clean
®
The Custom Clean feature automatically
mixes hot tap water with the BISSELL for-
mula. Simply choose one of the 4
settings (heavy traffic, normal clean, light
clean, or water rinse) and the ProHeat 2X
CleanShot will adjust the right amount of
cleaning solution to mix with the heated
water to fit your cleaning need.
CleanShot
®
The CleanShot feature gives you the ability
to tackle tough stains with the push of a
button. Cleaning solution is sprayed in a
concentrated stream, penetrating the stain
and allowing for better cleaning focus.
Simply spray and suction and the stain
(located on upper handle)
is gone! CleanShot is especially effective
for spots and stains that would other-
wise take a lot of deep cleaning cycles to
remove. It allows the cleaning formula
Flow Indicator
and machine to do the work for you.
Dry Aire™ (select models only)
The Dry Aire system spreads hot air
CleanShot ®
across the carpet to aid in drying. The
feature runs while your machine is
powered.
Flow indicator (select models only)
The flow indicator is located on the rear
cover of your unit. When the unit runs
out of water or solution the flow indica-
tor will instantly let you know
2-in-1 water tank
Our 2-in-1 water tank full capacity system
Dry Aire™
is designed with a heavy duty bladder
inside for clean water. As you clean, the
clean water in the bladder will empty
and mix with the cleaning formula. Dirty
water pulled out of your carpets will
collect around the outside of the bladder
so that clean and dirty water are always
kept separate. This allows the user to only
carry one tank to and from the sink for
emptying and filling.
7
w w w . b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1