Description & Screws
13
Remove the DC VSS-PD BOARD.
•
Gently lift up (Bottom Right corner) to
release the lock.
•
Use both hands to hold the board and slide
to the left to release.
NOTE
When installing the DC VSS-PD BOARD,
verify the board is properly positioned in all 4
mounting slots.
Locking
NOTE
Reassembly procedures are in the reverse order of disassembly procedures.
Locking
Fixing Hole
3. Disassembly and Reassemble
Picture Description
Bottom chassis Guide Fixing Hole
Slide to the left to release the board
Locking
3-5