How To Adjust The Screen Refresh Rate - BenQ 22" Wide-Screen LCD Monitor FP222W User Manual

6. How to adjust the screen refresh rate

You don't have to choose the highest possible refresh rate on an LCD display, because it is not
technically possible for an LCD display to flicker. The best results are obtained by using the factory
modes already set in your computer. There is a table with the factory modes in the specification
section of this Users Manual:
You can choose 60 Hertz for the native resolution of 1680 x 1050.
1. Double click the Display icon in Control Panel.
2. From the Display Properties window, select the Settings tab and click the Advanced button.
3. Select the Adapter tab, and select an appropriate refresh rate to match one of the applicable
factory modes as listed in the specification table.
4. Click Change, OK, then Yes.
5. Close the Display Properties window.
22 How to adjust the screen refresh rate
Supported PC Timings on page 37