Belkin PM01122EA-B User Manual page 30

alTeRNaTe seTUP MeTHod
sections
table of contents
9� Internet settings
Shows the settings of the Internet/WAN side of the Router that
connects to the Internet. Changes to any of these settings can be made
by clicking on the links or by clicking on the "Internet/WAN" quick-
navigation link on the left side of the screen.
10� features
Shows the status of the Router's firewall, and wireless features.
Changes can be made to the settings by clicking on any one of the links
or by clicking the quick-navigation links on the left side of the screen.
11� Page Name
The page you are on can be identified by this name. This User Manual
will sometimes refer to pages by name. For instance "LAN > LAN
Settings" refers to the "LAN Settings" page.
N Wireless Router
1 2 3 4 5 6
step 4: Configuring your Router for Connection
to your Internet service Provider (IsP)
The "Internet/WAN" tab is where you will set up your Router to connect
to your Internet Service Provider (ISP). The Router is capable of
connecting to virtually any ISP's system provided you have correctly
configured the Router's settings for your ISP's connection type. Your ISP
connection settings are provided to you by your ISP. To configure the
Router with the settings that your ISP gave you, click "Connection Type"
(A) on the left side of the screen. Select the connection type you use. If
your ISP gave you DNS settings, clicking "DNS" (B) allows you to enter
DNS address entries for ISPs that require specific settings. Clicking
"MAC Address" (C) will let you clone your computer's MAC address or
type in a specific WAN MAC address, if required by your ISP. When you
have finished making settings, the "Internet Status" indicator will read
"connection OK" if your Router is set up properly.
(A)
(B)
(C)
28
7 8 9 10