Belkin F5D8055tt User Manual page 37

USING THe BelKIN WIreleSS NeTWorKING UTIlITY
section
table of contents
128-Bit WEP Encryption
1. Select "WEP" from the drop-down menu.
2. After selecting your WEP encryption mode, you can enter your key
by typing in the hex key manually. A hex (hexadecimal) key is a
combination of numbers and letters from A–F and 0–9. For 128-bit
WEP, you must enter 26 hex characters.
For instance:
C3 03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 =128-bit WEP key
3. Click "Save" to finish. Encryption in the wireless router (or access
point) is now set. You must now configure each of the computers on
your wireless network with the same security settings.
WArNING: If you are using a wireless client to turn on the
security settings in your wireless router (or access point), you will
temporarily lose your wireless connection until you activate security
on your wireless client. Please record the key prior to applying
changes in the wireless router (or access point). If you don't
remember the hex key, your client will be locked out of the wireless
router (or access point).
N+ Wireless USB Adapter
1 2 3 4 5 6
35