Tuner Picture In Picture (Pip) Operation; Vcr And Cable Box - Panasonic CT-3272S Operating Instructions Manual

0392Eproduction.fm Page 7 Monday, February 26, 2001 5:12 PM
1 Tuner Picture In Picture (PIP) Operation Only
PIP Operation with a VCR and Cable Box
ANT IN
S-VIDEO
CABLES NOT SUPPLIED
Note: Refer to the FEATURE COMPARISON CHART on page 3 for your television PIP capability.
This television includes a Picture In Picture (PIP) feature. A second video source
(VCR, Camcorder, etc.) is required to provide a second picture.
Connect your television to a VCR and Cable Box, as shown.
TERMINALS ON BACK OF TV
AUDIO
R L
TO AUDIO
AMP
2
INPUT
1
Note: The Remote Control must be programmed with supplied codes to operate the VCR and Cable
Box. See Programming the Remote Control in the Remote Control Quick Reference Guide.
Procedure
Press the PIP button on the Remote Control to display the PIP frame.
Note: The PIP picture is the same as the main picture, initially.
To view a different picture in the PIP frame:
r
Press the TV/VIDEO button on the Remote Control to select the video PIP source.
r
Verify the CABLE BOX and VCR are ON and the VCR is tuned to channel 3.
r
Choose channels for the PIP frame by pressing the CBL button on the Remote Control and
using the numeric keypad or CH up/down buttons.
r
Choose channels for the Main Picture by pressing the TV button on the Remote Control
and using the numeric keypad or CH up/down buttons.
Note: The SWAP button switches the PIP and Main Picture source. Press the RECALL button for
on screen PIP and Main Picture source status.
1 T P I
UNER ICTURE N
VIDEO
P (PIP) O
ICTURE PERATION
VCR
VIDEO OUT
L
AUDIO OUT
R
ANT IN ANT OUT
Cable spliltter
(not supplied)
O
NLY
CABLE BOX
ANT OUT
ANT IN
Incoming Cable
7