Windows Nt 4.0/2000/Xp; Usb Users - Canon IMAGECLASS D700 Series Printer Manual

iR1210G_iR1230G.book Page 9 Tuesday, June 24, 2003 2:22 PM

Windows NT 4.0/2000/XP

Windows NT 4.0/2000/XP Windows NT 4.0/2000/XP Windows NT 4.0/2000/XP

USB Users

USB Users USB Users USB Users
Windows 2000/XP Plug and Play Windows 2000/XP Plug and Play
Windows 2000/XP Plug and Play Windows 2000/XP Plug and Play
I
Following is the installation procedure of plug and play for "Using USB Port" under Windows
2000.
Before you install the software, make sure you do the following:
• Connect the machine to your computer (
• Turn on the machine (
• Start up Windows 2000.
Using USB Port (USB Cable)
NOTE
In order to use the printer via USB, the following requirements need to be satisfied.
• Your computer must be equipped with a USB port and it is necessary that its operation
is approved by the manufacturer.
• Windows NT 4.0 is not available for USB.
.
1 Plug and Play will activate and the USB class driver, "USB Printing Support" is
automatically detected and installed.
2
Log on as member of Administrators. The full control access right for the printer is necessary
for the installation of the CAPT.
Set-up Instructions).
Set-up Instructions).
2
2-9