Advanced Features; Advanced; Zone 1 Setup (A) - B&K Reference 20 Plus A/V System Controller Owner's Manual

WARNING -
The following describes the advanced features of the processor. Since changing some of
these functions may cause severe effects such as no sound or no remote control operation, we suggest you leave
this menu disabled (hidden) for normal operation. If you are unsure of what you are changing
any advanced operations. These features may be activated by simultaneously pressing the SLEEP, DOWN, and
UP buttons on the front panel of the processor.

Advanced

Usually these settings may be left set to the factory defaults. However, these settings allow additional
modifications to the operation of your processor. Make sure you are in the SETUP SYSTEM MENUS and your
remote is in B&K mode.
MAIN MENU
1 Zone 1 Operation
2 Zone 2 Operation
3 Zone 1 Favorite Presets
4 Zone 2 Favorite Presets
5 System Setup 5 System Setup
6 Memory Backup/Restore
next item
MENU
6<67(0 6(783
From Remote
­ V
1
(PAUSE) or (STOP)
2 SEL or ENTER

Zone 1 Setup (A)

Zone 1 (A) Configuration will allow you to set maximum volume level, remote control 'Zone' ID, OSD enable, V1
tape mode and surround operation for Zone 1 (A). Make sure you are in the ADVANCED SYSTEM SETUP menu
and the remote is in B&K mode.
ADVANCED SYSTEM SETUP
1 Zone 1 Setup 'A'
1 Zone 1 Setup 'A'
2 Zone 2 Setup 'B'
3 Power On Titles
4 Control Out
5 Security Options
6 DSP Usage
7 RS-232 Control Port
next item
MENU setup system

ADVANCED FEATURES

SEL select
exit menu system
From Front Panel
(UP) or (DOWN)
(ENTER)
SEL select
= 6(783 $
SETUP SYSTEM
1 Speakers
2 Displays
3 Inputs
4 Presets
5 Advanced 5 Advanced
next item
MENU main menu
6(783 $'9$1&('
Action
move to Advanced
activate ADVANCED SYSTEM SETUP
ADVANCED ZONE A SETTINGS
1 Max Level
1 Max Level
2 Zone ID
3 On Sreen Display
4 V1 Output
5 Surround Modes
next item adjust
MENU advanced setup
=$ 0$; /(9(/ 
61
DO NOT
SEL select
+15 dB
+15 dB
1
Enabled
Tape
Auto
13258 11/01
perform