Download Print this page
Henny Penny LOV LVG-100 Series Quick Start Manual
Henny Penny LOV LVG-100 Series Quick Start Manual

Henny Penny LOV LVG-100 Series Quick Start Manual

Advertisement

Available languages

Available languages

Quick Links

CHANGING THE JUG IN BOX (JIB)
1. Display shows "CHECK
JIB" and yellow light
comes on, replace the
JIB.
FILLING THE JUG IN BOX (JIB) ON
1. Display shows "CHECK
JIB" and yellow light
comes on, fill the JIB.
Any problems, refer to manual or contact Henny Penny Corp. 1-800-417-8405, or 937-456-8405.
These instructions are meant to be guidelines, not complete operating instructions. Read and
understand the complete operator's manual supplied with each unit.
11-30-10
2. Open RH door and slide
JIB from shelf. Depress
release button and dis-
connect hose from tube.
Pull fill tube from JIB and
pour remaining oil into the
vats equally.
BULK SYSTEM FRYERS (RTI)
2. Open
the door, that has
the RTI
switch.
88627-02
3. Prepare new jug to accept
the tube and insert tube
into new jug. Then slide
new jug into position
under fryer. Depress
release button and con-
nect fill hose to fill tube.
3. Press & hold the ADD
side of the RTI switch
to add oil to the JIB
FM07-771-A

Advertisement

loading

Summary of Contents for Henny Penny LOV LVG-100 Series

  • Page 1 JIB comes on, fill the JIB. Any problems, refer to manual or contact Henny Penny Corp. 1-800-417-8405, or 937-456-8405. These instructions are meant to be guidelines, not complete operating instructions. Read and understand the complete operator’s manual supplied with each unit.
  • Page 2 SUSTITUIR LA GARRAFA JIB 2. A bra la puerta derecha y 3. P repare la nueva garrafa 1. L a pantalla muestra “JIB IS LOW” (NIVEL BAJO deslice la garrafa JIB hasta en la que se va a introducir el conducto e inserte el EN GARRAFA JIB) y se que salga del soporte. Pulse enciende el piloto amarillo; el botón de liberación y conducto en la nueva garrafa. sustituya la garrafa JIB. desconecte la manguera del A continuación, deslice la garrafa bajo la freidora hasta conducto. Tire del conducto de llenado hasta que salga que quede correctamente encajada. Pulse el botón de la garrafa JIB y vierta el aceite restante en las cubetas de liberación y conecte la a partes iguales. manguera de llenado al conducto de llenado. LLENAR LA GARRAFA JIB EN LAS FREIDORAS CON SISTEMA DE ACEITE A GRANEL (RTI) 1. L a pantalla muestra “JIB 3. A priete y mantenga pulsado...