Rearview Camera; Homelink - Acura TL 2010 Manual

C u s t o m i z i n g S e t t i n g s
Some examples on how to program vehicle settings.
S t o r i n g A u d i o a n d C l i m a t e C o n t r o l S e t t i n g s
1. Turn the vehicle on.
2. Store your desired stations on
the preset buttons and adjust
your preferred audio sound
levels (BASS, TREBLE, etc.).
D r i v i n g P o s i t i o n M e m o r y S y s t e m ( D P M S )
1. Turn the vehicle on. Shift into
Park (P).
2. Adjust your preferred seat,
steering wheel, and outside
mirror settings.
Note: Each group of settings is activated by the corresponding remote
transmitter (1 or 2) when it's used to unlock the driver's door. When
activated, each item begins to adjust before you enter the vehicle.
* See "Customize Settings" in your owner's manual for other programmable settings.
10
10
3. Set your preferred climate
control settings (fan speed,
temperature, etc.).
4. Once you turn the car off,
your preferred settings are
saved and activated by the
corresponding remote (1 or 2).
3. Press and hold the SET button
until you hear a beep, then
release.
4. Press and hold the memory
button # corresponding to the
remote (1 or 2) you are using
until you hear two beeps.
Tech model shown
R E A R V I E W C A M E R A
For added convenience, the area behind your vehicle is displayed to help
you navigate while in Reverse (R).
H o w I t W o r k s
• When you shift into Reverse, a real-time image
of the area behind your vehicle is shown in the
navigation display, along with helpful parking
guide lines.
• Adjust the screen brightness by turning the
Interface Dial.
• The display turns off when you shift out of
Reverse.
H O M E L I N K ®
The HomeLink Universal Transceiver built into your vehicle can be
programmed to operate up to three remote-controlled devices around
your home, such as garage doors, lighting, or home security systems.
T r a i n i n g a B u t t o n
1
Position the remote transmitter you
wish to link 1–3 inches from the
HomeLink button you want to program.
2
Press and hold the desired
HomeLink button and the button on
the remote transmitter.
Does the HomeLink indicator (LED) blink at a
faster rate after about 10 seconds?
NO
a
Press and hold the button on the
remote and the HomeLink button at
the same time. Then, while
continuing to hold the HomeLink
button, press and release the button
on the remote every 2 seconds.
Does the LED blink at a faster rate within 20
seconds?
NO
If you have any problems programming HomeLink, see the owner's manual
included with the device you are trying to program, call HomeLink at
(800) 355-3515, or visit www.homelink.com.
( T e c h m o d e l s )
3 Press and hold the programmed
HomeLink button for about a
second.
Does the device (garage door opener) work?
NO
4
Training
Press and hold
complete
the HomeLink
button again.
HomeLink indicator
HomeLink LED
YES
flashes for 2 seconds,
remains on.
then remains on.
a
The remote has a rolling code.
Press the "learn" button on the
remote-controlled device (e.g.,
garage door opener).
b
Within 30 seconds, press and
hold the programmed HomeLink
YES
button for 2 seconds.
5
Press the programmed HomeLink
button again; the remote-controlled
device should operate.
YES
11
11