Height Of Needle - Baby Lock BL-101 Service Manual

2. ADJUSTMENT OF NEEDLE AND PRESSER FOOT HEIGHT
a) Height of needle
Turn handwheel, and bring the needle to the highest position.
Loosen screw "A", and turn the eccentric shaft to clockwise or counter-clockwise.
Organ
HAx1SP/CR 75/11
Right Needle
Needle plate
SX, DX, AT
b) Height of presser foot
Raise the presser foot lifter. Loosen screw "B", and move the presser foot bar to
raise or lower.
You are required to check the clearance between needle and presser foot.
Raise
Screw A
Eccentric shaft
Lower
Clockwise ------------------- Lower needle
Counter-clockwise--------- Raise needle

Height of needle

Organ
HAx1SP/CR 90/14
Right Needle
Needle plate
ATW
Presser foot bar
Screw B
Needle plate
Organ
ELx705CF 90/14
C Needle
3
Needle
plate
BLCS(3)
2
Organ
ELx705CF 90/14
Right
O Needle
2
Needle
plate
BLE5,BLE8
BLE8W
Needles
Needle position