How To Assemble - Vax U90-P4 Series Instruction Manual

Vax U90-P4 Series User Guide v1.4.qxd:UG
vax.co.uk

3. How to Assemble

IMPORTANT: Always unplug the vacuum cleaner
!
from the electrical outlet before assembling or
removing the accessories.
Tool required: Crosshead screwdriver
1. Push back panel onto base of unit. Insert hose storage
hook and secure in place with two screws provided
(Fig.3/1).
Fig.3/1
2. Place the handle onto the back panel and push down
firmly (Fig.3/2).
Fig.3/2
3. Insert the lock pin into the hole located at the bottom of
the handle, and secure into place with the small screw
provided (Fig.3/3).
4
assembly
5/7/11
All manuals and user guides at all-guides.com
Crosshead screwdriver required
11:48 Page 4
Fig.3/3
4. Attach hose onto cleaner (Fig. 3/4) and place the dirt
container onto the unit.
Fig.3/4
5. Store the TurboTool in the caddy on the handle
(Fig.3/5).
(Some models only)
Fig.3/5
Back of
unit