Problem: Printed Colours Appear Streaked Or Uneven, Too Much Ink; Problem: Ink On The Back Of Printed Sheets - Canon BJC-8500 User Manual

4
Problem : Printed colours appear streaked or uneven, too
1
2
Problem : Ink on the back of printed sheets.
1
2
3
4
128
After print head deep cleaning if the Nozzle Check Pattern is abnor-
mal, replace the BJ Cartridge.
much ink.
Adjust the settings in the printer driver.
For details refer to the Windows Print Guide or the Machintosh Print
Guide.
Make sure the paper output receiver has been installed correctly.
( 42)
Check the paper output receiver paper guide and make sure that it is
set to the correct mark for the media you are using.
If the printed sheets appear wet due to a large amount of ink, remove
each sheet from the paper output tray as it is ejected from the printer.
Check the software application and driver settings and make sure the
media size selected for printing matches the size of the media loaded
in the printer.
For example, if you attempt to print an A4-size page on B5 paper, the
print heads could run beyond edge of the paper and spray ink on the
platen. This stray ink could then stain the backs of other pages as they
are fed through the printer.
For a long print job, make sure you have the same type of media
loaded in the sheet feeder and the paper cassette.
Canon BJC-8500 User's Manual